喬越實業股份有限公司(Sil-More Industrial Ltd.)陶氏化學 DOW(原道康寧 Dow Corning)矽膠(Silicone / 有机硅)原料代理及經銷公司 - 大中華區一級專業代理商 (台灣/大陸),提供多樣且全方位的電子級與光電級矽膠(Silicone / 有机硅)產品, 滿足您對矽膠原料一次購足的需求。 

喬越實業股份有限公司 為全方位電子應用膠材專家, 滿足您對接著填縫 (接著、填縫),絕緣披覆 (絕緣、披覆),灌注封裝 (灌注、封裝),導熱材料,RTV室溫固化 (RTV、室溫固化),應用上的需求。

喬越實業旗下品牌:

          • UV-SIL
          • EP-SIL
          • PU-SIL

除代理道康寧的矽膠原料(silicone rubber) - 接著膠、絶綠膠、填縫膠、灌封膠外,喬越實業股份有限公司亦提供以下非矽膠(Non-silicone Products)產品:

光硬化接著劑

環氧樹脂

聚氨酯樹脂

瞬間膠

厭氧膠

螺絲固定膠

塑料接著膠

點膠設備

導電膠

導電塗料

導熱矽膠片

高導熱膏

功能應用材料

導熱墊片

導熱膠

導熱接著膠帶

光電產業膠材

矽油

非矽導熱膏

導熱接著劑

LOCA膠

膠材溶解劑

防污抗刮塗料

半導體IC封裝膠材

晶片固定銀膠

LWB螢光粉

LED封裝膠

LED螢光膠

去膠設備


  1. SIL-MORE EPO-SIL UF 1378 EPOXY FOR FLIPCHIP ENCAPSULATION BLACK,30ML=45G-SYR
    SIL-MORE EPO-SIL UF 1378 EPOXY FOR FLIPCHIP ENCAPSULATION BLACK,30ML=45G-SYR

    本產品是針對電子製品所開發,覆晶封裝用的單液型環氧樹脂 為無溶劑型單液環氧樹脂,完全不含揮發性物質,不會釋放毒素。在溫度80oC時具有良好的滲透性。固化後具有良好的低收縮性。固化後對於氣態和液態的水分都具有良好的抵抗能力。符合EC RoHS法規規範。符合氯<900ppm,溴<900ppm,氯+溴<1500ppm

    This product is developed for electronic products,flip-chip package with a one-part epoxy solvent-free single liquid epoxy resin, completely free of volatile substances,it will not release toxins.

    It has good permeability when the temperature is 80oC. After curing has excellent low shrinkage. After curing for gaseous and liquid water has a good resistance. Compliance with EC RoHS norms and regulations. Compliance with chlorine <900ppm,bromine <900ppm, chlorine + bromine <1500ppm

  2. SIL-MORE  EF 618 FC EPOXY ADHESIVE BLACK,1KG-CAN
    SIL-MORE EF 618 FC EPOXY ADHESIVE BLACK,1KG-CAN

    高接著強度 、加熱固化

    High adhesion strength、Heat cure

  3. SIL-MORE SA57S-1
    SIL-MORE SA57S-1

    快速固化接著

    Fast cure structral bonding

  4. SIL-MORE EF-618 (EC) EPOXY ADHESIVE BLACK,1KG-CAN
    SIL-MORE EF-618 (EC) EPOXY ADHESIVE BLACK,1KG-CAN

    高接著強度(AL) 、加熱固化.

    High adhesion strength、Heat cure

  5. SIL-MORE SFX 8358 STPU ADHESIVE WHITE,300ML=380G-CRT
    SIL-MORE SFX 8358 STPU ADHESIVE WHITE,300ML=380G-CRT

    快速固化、製程速度快及優異的接著韌性

    Fast cure reduce the working time and increase the efficiency at the same time.

    This product develops tough, strong,Good Adhesive Strength to multiple different material .

  6. SIL-MORE SFX 8358L STPU ADHESIVE BLACK,300ML=300G-CRT
    SIL-MORE SFX 8358L STPU ADHESIVE BLACK,300ML=300G-CRT

    快速固化、製程速度快及優異的接著韌性

    Fast cure reduce the working time and increase the efficiency at the same time.

    This product develops tough, strong,Good Adhesive Strength to multiple different material .

  7. SIL-MORE SFX 8358M STPU ADHESIVE BLACK,300ML=360G-CRT
    SIL-MORE SFX 8358M STPU ADHESIVE BLACK,300ML=360G-CRT

    快速固化、製程速度快及優異的接著韌性

    Fast cure reduce the working time and increase the efficiency at the same time.

    This product develops tough, strong,Good Adhesive Strength to multiple different material .

  8. SIL-MORE EF 473 A1 EPOXY POTTING RESIN BLACK,5KG-CAN
    SIL-MORE EF 473 A1 EPOXY POTTING RESIN BLACK,5KG-CAN

    低黏度、電性佳、絶緣性良好

    Low viscosity, Good Insulation

  9. SIL-MORE AD 711 WHITE,100G-CAN
    SIL-MORE AD 711 WHITE,100G-CAN

    混合後彽黏度灌注/電器性質良好/無溶劑(100% solid content)/室溫硬化(升溫可加速反應)/灌注後發泡,體積膨脹約1.5倍

    Low initial viscosity after mixing solvent-free casting resin)/Good electrical characteristics/Solvent-free(100% solid content)/The reaction of the mixtures is started in room temperatures(The reaction is accelerated during higher temperatures)/The volume of the resin expanded about 150% after casting

  10. SIL-MORE AO 131 WHITE,100G-CAN
    SIL-MORE AO 131 WHITE,100G-CAN

    抗沉降劑

    Anti-Sendimentation Agents

  11. SIL-MORE SIL-BC 450 BLUE RAY 450NM CUT YELLOW,10G-CAN
    SIL-MORE SIL-BC 450 BLUE RAY 450NM CUT YELLOW,10G-CAN

    金屬氧化物擴散粉

    Diffusion Brightening Agents

  12. SIL-MORE SIL-CB 909
    SIL-MORE SIL-CB 909

    增白色劑

    Blackout

  13. SIL-MORE EU 220 A EPOXY POTTING RESIN CLEAR,5KG-CAN
    SIL-MORE EU 220 A EPOXY POTTING RESIN CLEAR,5KG-CAN

    低黏度、透光性佳、絶緣性良好、耐候性高

    Low viscosity, good to operate and translucent.Good Insulation and weathering resistance

  14. SIL-MORE EU 220 B EPOXY CURING AGENT CLEAR,5KG-CAN 2:1
    SIL-MORE EU 220 B EPOXY CURING AGENT CLEAR,5KG-CAN 2:1

    低黏度、透光性佳、絶緣性良好、耐候性高

    Low viscosity, good to operate and translucent.Good Insulation and weathering resistance

  15. SIL-MORE HU 101PU CURING AGENT CLEAR,5KG-CAN 1:1
    SIL-MORE HU 101PU CURING AGENT CLEAR,5KG-CAN 1:1

    具有耐陽光紫外線,室外長時間曝曬不變黃之優點

    Flexible type for 3D doming ,potting with excellent UV resistance