Department refers daily Consumer life use of electronic products.It is a specific household appliance with electronic components that are often used for entertainment, communications and clerical purposes such as telephones, audio equipment, television,DvdPlayers and even electronic clocks. Consumer electronics products in the worldare manufactured, focusing especially on the low-cost production areas of mainland China.

An important feature of consumer electronics is that they all have a tendency to lower prices over time. This is due to the efficiency of manufacturers and the improvement of technology, so that consumer electronics can continue to introduce new products. Semiconductor-related electronic products, such as computer equipment,are complianceMoore's law, that is, in the same Price, every 18 After a month, the product performance will be increased by one times. However, this has prompted many consumers to regularly replace the consumer electronics products, the problem of electronic waste.

Volume of goods :

In addition to volume-related large household appliances OutsideMostly towards the frivolousShort Development. For easy portability or use.

Automated :

such as single-Touch manipulation (One Touch), Fuzzy logic (Fuzzy logicTo simplify the operation of the user.

Energy-saving design :

Because of standby (Standby Power) still need to consume5-10%of energy. So by improving the design of the circuit, the power consumption will be reduced with the standby mode.

  1. SIL-MORE UV-SIL 8016-1 UV LOCA ADHESIVE CLEAR,1KG-CAN
    SIL-MORE UV-SIL 8016-1 UV LOCA ADHESIVE CLEAR,1KG-CAN

    Soft material, suitable for the next time

  2. DOWSIL™ 92-023 PRIMER,340G-CAN
    DOWSIL™ 92-023 PRIMER,340G-CAN

    Improves inhibition resistance for addition cure productives

  3. DOWSIL™ P 5200 RED
    DOWSIL™ P 5200 RED

    Low-VOC alternative, easy to distinguish

  4. DOWSIL™ PR 1200 RTV PRIMER COAT CLEAR,309G -CAN
    DOWSIL™ PR 1200 RTV PRIMER COAT CLEAR,309G -CAN

    Solvent used does not deplete the ozone layer

  5. DOWSIL™ 732 RTV CLEAR,300ML-12CTN
    DOWSIL™ 732 RTV CLEAR,300ML-12CTN

    General adhesive sealant,potting

  6. DOWSIL™ SH 780 RTV (JIS) BLACK,330ML-CRT
    DOWSIL™ SH 780 RTV (JIS) BLACK,330ML-CRT

    Fast Tack Free/Excellent adhesion strength

  7. DOWSIL™ TC 5022 COMPOUND GRAY,1KG-CAN
    DOWSIL™ TC 5022 COMPOUND GRAY,1KG-CAN

    Non-curing, thermally conductive silicone paste

  8. DOWSIL™ TC 5026 COMPOUND GRAY,1KG-CAN
    DOWSIL™ TC 5026 COMPOUND GRAY,1KG-CAN

    Non-curing, thermally conductive silicone paste

  9. DOWSIL™ TC 5121C LV TC COMPOUND GREENISH YELLOW,1KG-CAN
    DOWSIL™ TC 5121C LV TC COMPOUND GREENISH YELLOW,1KG-CAN

    Non-curing, thermally conductive silicone paste

  10. DOWSIL™ TC 5622 COMPOUND GRAY,1KG-CAN
    DOWSIL™ TC 5622 COMPOUND GRAY,1KG-CAN

    Non-curing, thermally conductive silicone paste

  11. DOWSIL™ TC 5888 5W,THERMALLY CONDUCTIVE COMPOUND GRAY,1KG-CAN
    DOWSIL™ TC 5888 5W,THERMALLY CONDUCTIVE COMPOUND GRAY,1KG-CAN

    Non-curing, thermally conductive silicone paste

  12. SIL-MORE UV-SIL 8007 UV CURE ADHESIVE CLEAR,30G-SYR
    SIL-MORE UV-SIL 8007 UV CURE ADHESIVE CLEAR,30G-SYR

    High hardness/ Scratch resistance/Resistance to oil and solvent/High Temp/High Humidity

    Suitable: Glass / Matel/ Camera lens protect

  13. ASKMI AF-100 AL-1
    ASKMI AF-100 AL-1

    Silver paste for membrance screen printing.

  14. ASKMI AF-130 GPT-5 SILVER PASTE SILVER,1KG-CAN
    ASKMI AF-130 GPT-5 SILVER PASTE SILVER,1KG-CAN

    Resistive Touch Screen printing.Good adhesive at ITO/PET.

  15. ASKMI AF-130 LTP-11 CONDUCTIVE SILVER PASTE SILVER,500G-CAN
    ASKMI AF-130 LTP-11 CONDUCTIVE SILVER PASTE SILVER,500G-CAN

    Touch Panel For Laser Etching L/S 20/20~50/50 For Laser.

  16. ASKMI AF-130 TPF-5
    ASKMI AF-130 TPF-5

    For Fine Pitch Screen printing. For Capacitive Touch for Fine Pitch Screen print. L/S 50/50~70/70. ITO/PET and ITO/Glass

  17. ASKMI AF-130 TPF-7 SILVER PASTE SILVER,1KG-CAN
    ASKMI AF-130 TPF-7 SILVER PASTE SILVER,1KG-CAN

    For Fine Pitch Screen printing. For Capacitive Touch for Fine Pitch Screen print - L/S 60/60~100/100.

  18. ASKMI AF-130-LTP-10
    ASKMI AF-130-LTP-10

    Touch Panel For Laser Etching L/S 60/60~100/100 For Laser.

  19. ASKMI AF-130 LTP-5 SILVER PASTE SILVER,1KG-CAN
    ASKMI AF-130 LTP-5 SILVER PASTE SILVER,1KG-CAN

    Touch Panel For Laser Etching L/S 20/20~50/50 For Laser.

  20. ASKMI ACF 805 CONDUCTIVE PASTE SILVER,200G-CAN
    ASKMI ACF 805 CONDUCTIVE PASTE SILVER,200G-CAN

    Sutable use at Ultra Thin Notebooks PC Monita around the point on the panel will be static dissipative . Possible use at room temperature curing

  21. ASKMI GF-2005K
    ASKMI GF-2005K

    For FPC , PET Menbrance, Resistor

  22. ASKMI GF-2060 BLACK 180G-CAN
    ASKMI GF-2060 BLACK 180G-CAN

    Use asMembrance FPC, PETconductivecircuit

  23. ASKMI GR-2025 CARBON PASTE BLACK,1KG-CAN
    ASKMI GR-2025 CARBON PASTE BLACK,1KG-CAN

    Use as PCB , Glass , like hardsubstrate, conductive materials

  24. ASKMI GR-5405
    ASKMI GR-5405

    Use on PCB Resistor Variable resistor

  25. SIL-MORE EPO-SIL UF 1100 FLIP-CHIP ENCAPSULANT EPOXY BLACK,30ML-SYR
    SIL-MORE EPO-SIL UF 1100 FLIP-CHIP ENCAPSULANT EPOXY BLACK,30ML-SYR

    This product is developed for electronic products, flip-chip package with a single-part epoxy resin. Has good operability, can be widely used in electronic products perfusion, caulking and packaging.

  26. SIL-MORE EPO-SIL UF 1378 EPOXY FOR FLIPCHIP ENCAPSULATION BLACK,30ML=45G-SYR
    SIL-MORE EPO-SIL UF 1378 EPOXY FOR FLIPCHIP ENCAPSULATION BLACK,30ML=45G-SYR

    This product is developed for electronic products,flip-chip package with a one-part epoxy solvent-free single liquid epoxy resin, completely free of volatile substances,it will not release toxins.

    It has good permeability when the temperature is 80oC. After curing has excellent low shrinkage. After curing for gaseous and liquid water has a good resistance. Compliance with EC RoHS norms and regulations. Compliance with chlorine <900ppm,bromine <900ppm, chlorine + bromine <1500ppm

  27. GREAT EASTERN HM 099C ELECTRONIC GRADE PUR MILKY,18KG-PAIL
    GREAT EASTERN HM 099C ELECTRONIC GRADE PUR MILKY,18KG-PAIL

    Electronic grade moisture curing reactive polyurethane hot melt adhesives (PUR)

  28. GREAT EASTERN HM 081B ELECTRONIC GRAND PUR BLACK,38G=33ML-SYR
    GREAT EASTERN HM 081B ELECTRONIC GRAND PUR BLACK,38G=33ML-SYR

    Electronic grade moisture curing reactive polyurethane hot melt adhesives (PUR)

  29. GREAT EASTERN HM 085L ELECTRONIC GRADE PUR MILKY,33ML-SYR
    GREAT EASTERN HM 085L ELECTRONIC GRADE PUR MILKY,33ML-SYR

    Electronic grade moisture curing reactive polyurethane hot melt adhesives (PUR)

  30. DOWSIL™ TC 5021 COMPOUND GRAY,1KG-CAN
    DOWSIL™ TC 5021 COMPOUND GRAY,1KG-CAN

    Non-curing, thermally conductive silicone paste

  31. DOWSIL™ SE 1740 A-B ENCAPSULANT CLEAR
    DOWSIL™ SE 1740 A-B ENCAPSULANT CLEAR

    低温固化型

    Low temperature curing

  32. DOWSIL™ 184 A-B ELASTOMER KIT,19.9KG-KIT 10:1
    DOWSIL™ 184 A-B ELASTOMER KIT,19.9KG-KIT 10:1

    Transparent encapsulant,room temperature cure

  33. SIL-MORE EU 101 FLEXIBLE PU RESIN CLEAR,5KG-CAN 1:1
    SIL-MORE EU 101 FLEXIBLE PU RESIN CLEAR,5KG-CAN 1:1

    Flexible type for 3D doming ,potting with excellent UV resistance

  34. DOWSIL™ TC 6020
    DOWSIL™ TC 6020

    Thermally Conductive Encapsulant

  35. SIL-MORE EPO-SIL 6824 FLIP-CHIP ENCAPSULANT EPOXY RESIN BLACK,30G-SYR
    SIL-MORE EPO-SIL 6824 FLIP-CHIP ENCAPSULANT EPOXY RESIN BLACK,30G-SYR

    For CSP, BGA chip underfill do, you can buffer the expansion and contraction of the solder ball contact stress, and can be buffered reaction drop test conduction shear.

  36. MCLUBE MAC 715 RELEASE AGENT MILKY,5L=3.53KG-CAN
    MCLUBE MAC 715 RELEASE AGENT MILKY,5L=3.53KG-CAN

    Solvent base release agent. Semi-permanent release coating for PU/Epoxy

  37. MCLUBE MAC 794 WATER BASE RELEASE AGENT CLEAR,20L-PAIL
    MCLUBE MAC 794 WATER BASE RELEASE AGENT CLEAR,20L-PAIL

    Water base release agent. Aqueous solvent-free release agent free of PFOS PFOA toxic carcinogen,in line with EU environmental standards

  38. SIL-MORE SA57S-1
    SIL-MORE SA57S-1

    Fast cure structral bonding

  39. FONG YONG E 536 EPOXY POTTING RESIN BLACK,5KG-CAN 100:30
    FONG YONG E 536 EPOXY POTTING RESIN BLACK,5KG-CAN 100:30

    high voltage resistance,high temperature resistance up to 150℃

  40. SIL-MORE SFX 8358 STPU ADHESIVE WHITE,300ML=380G-CRT
    SIL-MORE SFX 8358 STPU ADHESIVE WHITE,300ML=380G-CRT

    Fast cure reduce the working time and increase the efficiency at the same time.

    This product develops tough, strong,Good Adhesive Strength to multiple different material .

  41. SIL-MORE SFX 8358L STPU ADHESIVE BLACK,300ML=300G-CRT
    SIL-MORE SFX 8358L STPU ADHESIVE BLACK,300ML=300G-CRT

    Fast cure reduce the working time and increase the efficiency at the same time.

    This product develops tough, strong,Good Adhesive Strength to multiple different material .

  42. SIL-MORE SFX 8358M STPU ADHESIVE BLACK,300ML=360G-CRT
    SIL-MORE SFX 8358M STPU ADHESIVE BLACK,300ML=360G-CRT

    Fast cure reduce the working time and increase the efficiency at the same time.

    This product develops tough, strong,Good Adhesive Strength to multiple different material .

  43. DOWSIL™ DC 3-0115 AUTOMOTIVE SEALANT GRAY,305ML-CRT
    DOWSIL™ DC 3-0115 AUTOMOTIVE SEALANT GRAY,305ML-CRT

    Excellent unprimed adhesion & chemical oil resistant

  44. DOWSIL™ 3-6265 THIXOTROPIC ADHESIVE BLACK,400G-CRT
    DOWSIL™ 3-6265 THIXOTROPIC ADHESIVE BLACK,400G-CRT

    Excellent unprimed adhesion & chemical oil resistant

  45. ASKMI NPC-1
    ASKMI NPC-1

    High reflectance/Hi Temp stability/UV aging resistance

  46. ASKMI R-500B8K3A
    ASKMI R-500B8K3A

    Protect Paste, Solvent-free andthickness of the coating of high-low, stable continuous printability.

    After the processing operations can be easily peeled off, the surface will not have the presence of residue after peeling .

  47. ASKMI R-500 B-8TH PROTECT PASTE BLUE,1KG-CAN
    ASKMI R-500 B-8TH PROTECT PASTE BLUE,1KG-CAN

    Protect Paste, Solvent-free andthickness of the coating of high-low, stable continuous printability.

    After the processing operations can be easily peeled off, the surface will not have the presence of residue after peeling .

  48. ASKMI R-500C
    ASKMI R-500C

    Protect Paste, Solvent-free andthickness of the coating of high-low, stable continuous printability.

    After the processing operations can be easily peeled off, the surface will not have the presence of residue after peeling .

  49. DOWSIL™ Q3-6611 ADHESIVE BLACK,18.1KG-PAIL
    DOWSIL™ Q3-6611 ADHESIVE BLACK,18.1KG-PAIL

    Adhesive with good flow ability and high tensile strength

  50. ASKMI UVA-101
    ASKMI UVA-101

    Good adhesive , Good oil resistance and good solvent resistance

  51. ASKMI UV-DAM-500
    ASKMI UV-DAM-500

    Does not slip phenomenon glue for increasing the substrate thickness

  52. DOWSIL™ 1-2577 CONFORMAL COATING,18.1KG-PAIL
    DOWSIL™ 1-2577 CONFORMAL COATING,18.1KG-PAIL

    A solvent-borne, one component, transparent silicone resin

  53. DOWSIL™ 1-2577 LOW VOC CONFORMAL COATING,15KG-PAIL
    DOWSIL™ 1-2577 LOW VOC CONFORMAL COATING,15KG-PAIL

    One-part,ozone-safe (VOC exempt)solvent-borne, elastoplastic silicone resin

  54. DOWSIL™ 1-2620 DISPERSION,18.1KG-PAIL
    DOWSIL™ 1-2620 DISPERSION,18.1KG-PAIL

    One-part, lower viscosity, solvent-borne,transparent silicone resin

  55. DOWSIL™ 1-2620 LOW VOC BLADDER PAK,15KG-PAIL
    DOWSIL™ 1-2620 LOW VOC BLADDER PAK,15KG-PAIL

    One-part, lower viscosity, ozone-safe (VOC exempt)solvent-borne, elastoplastic silicone resin

  56. DOWSIL™ 3-1953 CONFORMAL COATING 94V0 3.6P,18.1KG-PAIL
    DOWSIL™ 3-1953 CONFORMAL COATING 94V0 3.6P,18.1KG-PAIL

    A fast room-temperature vulcanizing (RTV), solventless, silicone elastomer

  57. ASKMI IF-300 TC-2 INSULATION PASTE CLEAR,300G-CAN
    ASKMI IF-300 TC-2 INSULATION PASTE CLEAR,300G-CAN

    Use at Menbrance Switch , Touch Screen for Capacitance & resistance type Non Halogen type inks

  58. ASKMI IF-300 TM-3
    ASKMI IF-300 TM-3

    Use at Menbrance Switch , Touch Screen for Capacitance & resistance type Non Halogen type inks

  59. ASKMI IF-310-2□
    ASKMI IF-310-2□

    Mobile phones, navigator , TV, Capactive & resistance screen use ink . Halogen free solvent based screen printing inks.

  60. ASKMI IF-320-□
    ASKMI IF-320-□

    For OGS strengthened glass for BM , use at Navigtor mobile phone LCD TV. Strengthen PMMA, PET can be use .

  61. ASKMI IR-300T FF-2
    ASKMI IR-300T FF-2

    For Capacitive touch screen with line bridge insulation protection for over coat, Color Filter /CF protective layer,Passivation permanent material.

  62. ASKMI UV 400 TCR(EX-2) COATING PASTE CLEAR,300G-CAN
    ASKMI UV 400 TCR(EX-2) COATING PASTE CLEAR,300G-CAN

    Good adhesive , good hardness., Good Insulation protect substrance and protect circuit & conductive loop.

  63. ASKMI UV-400 TCF
    ASKMI UV-400 TCF

    High hardness and good Transparency , good adhesive.

  64. ASKMI UV-400 TCR
    ASKMI UV-400 TCR

    Suitable for screen printing coating process, continuous printability for ITO / glass andgood adhesion

  65. ASKMI UV-400 TCRF
    ASKMI UV-400 TCRF

    High hardness and good transparency , good adhesion.

    Good insulation and protection substrate for the conductive loop and the protection circuit, Hardening effect can be adhesiveimmediately.

  66. ASKMI UV400 TRF(EX1) COATING PASTE CLEAR,300G-CAN
    ASKMI UV400 TRF(EX1) COATING PASTE CLEAR,300G-CAN

    High hardness and good Transparency , good adhesive.

  67. DOWSIL™ CN 8760 B POTTING BLACK,25KG-PAIL
    DOWSIL™ CN 8760 B POTTING BLACK,25KG-PAIL

    Thermally/Conductive&Low viscosity

  68. DOWSIL™ 160 A-B SILICONE ELASTOMER WHITE
    DOWSIL™ 160 A-B SILICONE ELASTOMER WHITE

    Thermally/Conductive&High viscosity

  69. SIL-MORE EU 220 A EPOXY POTTING RESIN CLEAR,5KG-CAN
    SIL-MORE EU 220 A EPOXY POTTING RESIN CLEAR,5KG-CAN

    Low viscosity, good to operate and translucent.Good Insulation and weathering resistance

  70. SIL-MORE EU 220 B EPOXY CURING AGENT CLEAR,5KG-CAN 2:1
    SIL-MORE EU 220 B EPOXY CURING AGENT CLEAR,5KG-CAN 2:1

    Low viscosity, good to operate and translucent.Good Insulation and weathering resistance

  71. SIL-MORE HU 101PU CURING AGENT CLEAR,5KG-CAN 1:1
    SIL-MORE HU 101PU CURING AGENT CLEAR,5KG-CAN 1:1

    Flexible type for 3D doming ,potting with excellent UV resistance

  72. FONG YONG H536 EPOXY CURING AGENT LIGHT AMBER,300G-CAN 100:30
    FONG YONG H536 EPOXY CURING AGENT LIGHT AMBER,300G-CAN 100:30

    high voltage resistance,high temperature resistance up to 150℃

  73. PU-SIL PU-SIL 303 A 2K NON-SOLVENT CASTING RESIN LIGHT YELLOW LIQUID,15KG-PAIL
    PU-SIL PU-SIL 303 A 2K NON-SOLVENT CASTING RESIN LIGHT YELLOW LIQUID,15KG-PAIL

    混合後彽黏度灌注/電器性質良好/無溶劑(100% solid content)室溫硬化 (升溫可加速反應)/耐溫範圍:-40~200℃

    Low initial viscosity after mixing solvent-free casting resin/Good electrical characteristics/Solvent-free(100% solid content)/The reaction of the mixtures is started in room temperatures. (Thereaction is accelerated during higher temperatures)/Temp. Resistance:-40~200℃

  74. DOWSIL™ CN-7326 A-B Potting Agen KIT , A:12KG/B:2kg, 6:1
    DOWSIL™ CN-7326 A-B Potting Agen KIT , A:12KG/B:2kg, 6:1

    Two-part Silicone potting component kits

    Suitable for automotive electronics, power(battery) modules and Electric control units product. 

  75. SYLGARD 184 A-B ELASTOMER KIT,19.9KG-KIT 10:1
    SYLGARD 184 A-B ELASTOMER KIT,19.9KG-KIT 10:1

    Transparent encapsulant,room temperature cure